CORRECT: OPTIMUM GPS- Glaze, Polish, & Seal
Optimum GPS™ is the most remarkable, all-in-one product ever produced in a spray form! This zero dusting, buttery-smooth formula is the ultimate, one-step product. It creates gloss and long term protection that is second to none. Optimum GPS™ contains micro abrasives that eliminate (not hide) minor surface imperfections. It provides swirl mark removal, the final polish and a durable wax/sealant…all in one step! The spray application makes priming the pad very easy and reduces product usage. GPS™ creates a perfect shine on all types of paint, fiberglass, gel coat and smooth molded plastic. A single application provides "optimum" protection for your vehicle that lasts for months!
Directions:
Shake well.
Hand Application: Spray on a small area and wipe in with a dampened foam or cloth applicator. After slight hazing occurs, wipe-off with a microfiber or terry towel for a perfect shine.
Machine Application: Apply with orbital or rotary polisher and appropriate pad for the job. Spray once to prime the pad and one spray per panel to create a lubricating barrier between the buffing pad and the surface. Work across the area until product disappears. (We suggest 1000-1400 rpms for rotary polishers). Wipe with a lightly misted cotton towel for a steak-free, perfect finish. For deeper surface imperfections, use Optimum Polish or Optimum Compound prior to GPS.
Hand Application: Spray on a small area and wipe in with a dampened foam or cloth applicator. After slight hazing occurs, wipe-off with a microfiber or terry towel for a perfect shine.
Machine Application: Apply with orbital or rotary polisher and appropriate pad for the job. Spray once to prime the pad and one spray per panel to create a lubricating barrier between the buffing pad and the surface. Work across the area until product disappears. (We suggest 1000-1400 rpms for rotary polishers). Wipe with a lightly misted cotton towel for a steak-free, perfect finish. For deeper surface imperfections, use Optimum Polish or Optimum Compound prior to GPS.
Available Sizes:
18 fl.oz
1 gal.
1 gal.
CORRECT: OPTIMUM HYPER POLISH
Optimum Hyper Polish is the first and only sprayable
polish in the marketplace. By spraying the polish onto a buffing pad, you can
effectively prime the entire pad with a minimal amount of product. Therefore
you are using the entire pad to polish the paint and achieve better results in
less time than a conventional polish.
Just like all Optimum polishes, Optimum Hyper Polish is extremely easy to use and has a long working time with no dusting or sling issues. Its spray application minimizes the chance of overloading or gumming up the pad, and it provides an even application. Optimum Hyper Polish easily wipes off with a damp microfiber towel, whether you use it in the sun or shade, to achieve outstanding results.
Optimum Hyper Polish is VOC compliant and body shop safe. It can be used with any type of buffing pad or buffing machine. It acts as a light compound with a cutting pad and as a finishing polish with a finishing pad. It works quickly to remove (not hide) swirl marks, scratches, and other blemishes, while creating a perfect shine on all types of paint.
Optimum Hyper Polish has excellent workability on painted surfaces and will not clog buffing pads. Aggressive enough for paint correction and swirl removal, yet the shine, clarity, and gloss of the paint left behind requires only final protection.
Just like all Optimum polishes, Optimum Hyper Polish is extremely easy to use and has a long working time with no dusting or sling issues. Its spray application minimizes the chance of overloading or gumming up the pad, and it provides an even application. Optimum Hyper Polish easily wipes off with a damp microfiber towel, whether you use it in the sun or shade, to achieve outstanding results.
Optimum Hyper Polish is VOC compliant and body shop safe. It can be used with any type of buffing pad or buffing machine. It acts as a light compound with a cutting pad and as a finishing polish with a finishing pad. It works quickly to remove (not hide) swirl marks, scratches, and other blemishes, while creating a perfect shine on all types of paint.
Optimum Hyper Polish has excellent workability on painted surfaces and will not clog buffing pads. Aggressive enough for paint correction and swirl removal, yet the shine, clarity, and gloss of the paint left behind requires only final protection.
Directions:
Shake well.
1. For general swirl or oxidation removal, use a polishing foam pad with a rotary buffer at 1200-1600 RPM. or an orbital polisher at speed 5.
2. Use 2-3 sprays initially to prime the pad. After initial priming, use one to two sprays per panel. There is no need to apply additional product since Optimum Hyper Polish has a long working time.
3. Use light to medium pressure on the buffer until desired results are achieved.
4. Wipe off residue with a dampened microfiber towel.
Shake well.
1. For general swirl or oxidation removal, use a polishing foam pad with a rotary buffer at 1200-1600 RPM. or an orbital polisher at speed 5.
2. Use 2-3 sprays initially to prime the pad. After initial priming, use one to two sprays per panel. There is no need to apply additional product since Optimum Hyper Polish has a long working time.
3. Use light to medium pressure on the buffer until desired results are achieved.
4. Wipe off residue with a dampened microfiber towel.
Available Sizes:
18 fl.oz
1 gal.
1 gal.
Video on how to apply the Optimum Hyper products onto the foam or wool pad:
Start by spinning the pad with the rotary buffer. Spray the Optimum Hyper product starting from the middle of the pad outwards.
CORRECT: OPTIMUM HYPER COMPOUND
An aggressive compound designed to remove deep scratches in
seconds! Optimum Hyper™Compound is the first and only spray compound
(patent pending) in the marketplace. It is designed to remove 1,500 grit and
finer scratches in one or two passes while creating a great finish in seconds.
Optimum Hyper™ Compound was designed for
professional detailers and auto body shops to cut through wet sanding marks and
deep scratches in one or two passes. Optimum Hyper Compound offers
all the advantages of Optimum line of polishes with long working time and zero
dusting.
The spray on application provides ease of use and reduces the amount of product needed to a fraction of the traditional products. 2-3 sprays is enough to cover the entire pad making the whole pad do the cutting and eliminating dry buffing.
The minor swirls left after using Optimum Hyper™ Compound can easily be removed with theOptimum™ Hyper Polish. Optimum Hyper™ Compound has a long working time to allow complete paint correction with one application. The reside is easily wiped off with a dry or damp microfiber towel.Optimum Hyper™ Compound contains no silicone oils or wax, so it is completely body shop safe.
Optimum Hyper™ Compound can be used at any speed on your polisher and with a wool or foam pad. When using a wool buffing pad, the compound will remove 1000 sand scratches and lighter at 1000-1400 RPM. Faster buffing speed is not needed with this product. When using a medium or heavy cut foam pad, the compound will remove 1500 sand scratches and lighter at 1000-1400 RPM. The compound works more or less aggressively depending on the pad you choose. Follow up with Optimum Hyper Polish to refine the paint surface before applying Optimum Car Wax. All Optimum products meet VOC regulations.
Directions:
To remove 1,500 grit or finer sanding marks spray Optimum Hyper™ Compound on the Optimum 100% Synthetic 4 Ply Twisted Wool Pad using a rotary buffer at 1200-1400 RPM. To remove lighter scratches and swirl marks, spray Optimum Hyper™ Compound on an orange foam pad using a rotary buffer at speeds of 1,200 - 1,400 rpm or an orbital polisher at the speed 5.
1. Shake Well. 2. Use 2-3 sprays initially to prime the pad. After the initial priming, use one to two sprays per panel. There is no need to apply additional product since Optimum Hyper Compound has a long working time and will continue on working to remove the scratches.
3. Use light to medium pressure on the buffer until desired results are achieved.
4. Wipe off residue with a dampened microfiber towel.
The spray on application provides ease of use and reduces the amount of product needed to a fraction of the traditional products. 2-3 sprays is enough to cover the entire pad making the whole pad do the cutting and eliminating dry buffing.
The minor swirls left after using Optimum Hyper™ Compound can easily be removed with theOptimum™ Hyper Polish. Optimum Hyper™ Compound has a long working time to allow complete paint correction with one application. The reside is easily wiped off with a dry or damp microfiber towel.Optimum Hyper™ Compound contains no silicone oils or wax, so it is completely body shop safe.
Optimum Hyper™ Compound can be used at any speed on your polisher and with a wool or foam pad. When using a wool buffing pad, the compound will remove 1000 sand scratches and lighter at 1000-1400 RPM. Faster buffing speed is not needed with this product. When using a medium or heavy cut foam pad, the compound will remove 1500 sand scratches and lighter at 1000-1400 RPM. The compound works more or less aggressively depending on the pad you choose. Follow up with Optimum Hyper Polish to refine the paint surface before applying Optimum Car Wax. All Optimum products meet VOC regulations.
Directions:
To remove 1,500 grit or finer sanding marks spray Optimum Hyper™ Compound on the Optimum 100% Synthetic 4 Ply Twisted Wool Pad using a rotary buffer at 1200-1400 RPM. To remove lighter scratches and swirl marks, spray Optimum Hyper™ Compound on an orange foam pad using a rotary buffer at speeds of 1,200 - 1,400 rpm or an orbital polisher at the speed 5.
1. Shake Well. 2. Use 2-3 sprays initially to prime the pad. After the initial priming, use one to two sprays per panel. There is no need to apply additional product since Optimum Hyper Compound has a long working time and will continue on working to remove the scratches.
3. Use light to medium pressure on the buffer until desired results are achieved.
4. Wipe off residue with a dampened microfiber towel.
Available Sizes:
18 fl.oz
1 gal.
1 gal.
CORRECT: OPTIMUM METAL POLISH
Optimum Metal Polish is the most effective and easy to use metal polish you will ever use! It can be used to remove oxidation, scratches, and swirl marks from all metal surfaces leaving a mirror shine. Optimum Metal Polish also leaves a protective coating to protect metal surfaces from oxidation.
Optimum Metal Polish can be used by hand or with buffing machines on any metal surface. The sub-micron polishing agents and chemical cleaners work quickly to remove oxidation, scratches, and swirl marks quickly to create a flawless mirror shine.
Optimum Metal Polish can be used by hand or with buffing machines on any metal surface. The sub-micron polishing agents and chemical cleaners work quickly to remove oxidation, scratches, and swirl marks quickly to create a flawless mirror shine.
Directions:
Apply Optimum Metal Polish to a terry cloth and buff the metal surfaces in a circular or back and forth motion for a few seconds till the black oxidation is dissolved away. Wipe the surface with a clean cloth to restore the original luster to any metal surface.
When using buffing machines, apply Optimum Metal Polish to a foam pad and buff for a few seconds till the black oxidation is dissolved. Use a terry cloth to remove the oxidation for a mirror shine.
Apply Optimum Metal Polish to a terry cloth and buff the metal surfaces in a circular or back and forth motion for a few seconds till the black oxidation is dissolved away. Wipe the surface with a clean cloth to restore the original luster to any metal surface.
When using buffing machines, apply Optimum Metal Polish to a foam pad and buff for a few seconds till the black oxidation is dissolved. Use a terry cloth to remove the oxidation for a mirror shine.
Available Sizes:
8 fl.oz
CORRECT: OPTIMUM DOUBLE SIDED RED FOAM PAD
CORRECT: OPTIMUM DOUBLE SIDED RED FOAM PAD
The 8" Double Sided Optimum Red Foam Pad is
the softest finishing pad in the marketplace. This high quality non-reticulated
foam is designed to give you a prefect finish when used with Optimum
Polish or Optimum Hyper Polish. The double sided pad provides two pads at
a very low price. Additional benefits include a more balanced pad since the pad
is always centered.
Optimum Red Foam along with the Optimum Hyper Polish removes marring and swirl marks and leaves a perfect finish in seconds.
Optimum Red Foam along with the Optimum Hyper Polish removes marring and swirl marks and leaves a perfect finish in seconds.
Available Sizes:
8" Double-Sided
The 5.5" Optimum Blue Waffle Foam Pad is a soft finishing pad that is used in the final step of polishing. The wavy edge design wraps the pad around the backing plate and provides a soft barrier that protects automotive surfaces.
Available Sizes:
5.5"The 5.5" Optimum Orange Waffle Foam Pad is designed to act as a cutting pad as well as a finishing pad depending on how much pressure is applied. The wavy edge design wraps the pad around the backing plate and provides a soft barrier that protects automotive surfaces.
The Optimum Orange Waffle Foam Pad can be used with rotary as well as dual action polishers. Use the Optimum Orange Waffle Foam Pad with Optimum Compound or Optimum Hyper Compound to remove deep scratches and swirl marks or with Optimum Polish or Optimum Hyper Polish to remove lighter scratches.
Available Sizes:
5.5"
The Optimum Microfiber Polishing Pad is the most advanced polishing pad in the marketplace. It is designed to be used with any rotary or dual action polisher to provide excellent cut and excellent finish. The advanced microfiber material removes paint defects quickly leaving an excellent finish behind. The thick foam keeps the pad and paint cooler to create better results while increasing the life of the pad.
The Optimum Microfiber Polishing Pad can be used with any polish and any rotary or dual action polisher to provide great cut and a great finish. For best results, use the Optimum Microfiber Polishing Pad with Optimum Polish or Optimum Hyper Polish to remove light scratches and swirl marks.
Available Sizes:
3.25"
5.25"
6.25"
6.25"
The Optimum Microfiber Cutting Pad is the most advanced cutting pad in the marketplace. It is designed to be used with any rotary or dual action polisher to provide excellent cut and great finish. The advanced microfiber material removes paint defects quickly leaving a great finish behind. The thick foam keeps the pad and paint cooler to create better results while increasing the life of the pad.
The Optimum Microfiber Cutting Pad can be used with any polish via any rotary or dual action polisher to provide great cut and a great finish. For best results, use the Optimum Microfiber Cutting Pad with Optimum Compound or Optimum Hyper Compound to remove deep scratches and heavy swirl marks.
Available Sizes:
3.25"
5.25"
6.25"
6.25"
CORRECT: OPTIMUM SYNTHETIC WOOL PAD
The 8" Optimum Double Sided Synthetic Wool Pad is
designed to cut paint defects quickly with minimal effort when used with Optimum
Hyper Compound. This combination of Optimum Synthetic Wool Pad along
with the Optimum Hyper Compound will remove deep scratches with
minimal effort. The minor swirl marks will be easily removed with Optimum
Hyper Polish and Optimum Red Foam Pad to a prefect finish. The
double sided pad provides two pads at a very low price. Additional benefits
include a more balanced pad since the pad is always centered.
Available Sizes:
8" Double-Sided
8" Single-Sided
8" Single-Sided
CORRECT: BACKING PLATES
OPTIMUM OPTI-FLEX ROTARY BACKING PLATE (7")
Use the Optimum Opti-Flex 7 Inch Rotary Backing Plate to ensure easy operation and great performance with Optimum 8 Inch Single-Sided Pads. The durable molded plate is surrounded by flexible urethane to protect the paint. Use the Optimum Opti-Flex 7 Inch Rotary Backing Plate with your high speed rotary polisher and any 8 inch pads with hook and loop fasteners.OPTIMUM OPTI-FLEX ROTARY BACKING PLATE (7")
The Optimum Opti-Flex 7 Inch Rotary Backing Plate features a 5/8 -11 internal thread. The plate is surrounded by soft, flexible urethane with a curved edge to protect the paint from accidental contact. The heavy duty hook and loop fasteners hold a pad securely to prevent sling-off. A centering hole enables you to perfectly center the pad to prevent wobbling.
Use the Optimum Opti-Flex 7 Inch Rotary Backing Plate with any 7.5 - 8 inch pad with hook and loop fasteners. If used with Optimum 8 Inch Single Sided Pads, the Optimum Opti-Flex 7 Inch Rotary Backing Plate perfectly aligns with the hook and loop backing on the pads for a strong hold. The size of Optimum pads also provides an adequate buffer zone between the Optimum Opti-Flex 7 Inch Rotary Backing Plate and the edge of the pad.
Use the Optimum Opti-Flex 7 Inch Rotary Backing Plate with the Optimum polishing system including Optimum Hyper Compound Spray, Optimum Hyper Polish Spray, and Optimum's 8 inch Single-Sided Foam and 100% Twisted Wool Pads.
Available Size:
7" Optimum Opti-Flex Rotary Backing Plate 5/8-11 internal thread.
Also Available:
In 5/8-11 internal thread:
3" MF Rotary Backing Plate
5" MF Rotary Backing Plate
6" MF Rotary Backing Plate
3" MF Rotary Backing Plate
5" MF Rotary Backing Plate
6" MF Rotary Backing Plate
FOR PRICING OR MORE INFORMATION:
+6016 660 3217
Or email us:
info.detailien@gmail.com
